SLIDING AND SWINGING DOORS

Made in Italy

Simple and elegant solutions

Scrigno sliding and swinging doors are able to satisfy all needs of customers looking for simple and elegant solutions to optimize the spaces of their home. After being carefully selected, the materials used in the manufacture of Scrigno products are transformed in a production process featuring typical craftsman skills.Buying a Scrigno sliding door means choosing a product that fully meets the expectations for a brand renowned for its quality at an international level. The attention dedicated to details and finishes on Scrigno sliding doors allows a vast variety of decor styles to be complemented with elegant and tasteful solutions that can be personalized in many different ways. Scrigno products are completed by an ample range of special accessories, handles and locks that can be perfectly combined with the door models chosen.

PLEIADI SLIDING DOORS
PLEIADI sliding doors show their versatility in the number of different frame models on which they can be fitted: Scrigno Base, Scrigno Granluce, Scrigno Pratico and Scrigno Essential. In this case the disappearing door is suitable for all spaces, and is ideal in all situations where space saving is of vital importance. Hollow-core panel with a thickness of 40 mm, supplied with a bottom groove for the floor guide and pre-mortised for the Kit Chiudiscrigno handle with lock (not included). PLEIADI sliding doors are available in standard sizes in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered. Available in versions with flush panels, fully glazed or glazed in small panes. Doors are ready for the insertion of a sheet of glass with a thickness of 6 mm, which is not supplied, permitting maximum personalization by users. Brown sealing strips are supplied for all wood models, with grey seals for the white lacquer version. Sealing strips for double doors are also included. The uprights of the frame surround are rounded, with flat crosspieces at the top.

Technical characteristics of sliding door panel

hollow-core panel with thickness 40 mm;
finishes available: Light Tanganyika, Walnut Tanganyika, Sanded Tanganyika;
White Lacquer;
versions available: flush door, glazed door, glazed panelled door;
lower groove for floor guide;
for double doors, door post sealing strips are included;
single doors are always pre-drilled for “Kit Chiudiscrigno” handles with lock (not included);
designed for fitting of 6 mm thickness glass;
glass is not supplied;
sealing strips are brown for all finishes, except for White Lacquer, for which the sealing strip is grey;
Versions with full glazing and with glazing panels are not available for masonry walls with thickness 90 cm or for plasterboard walls with thickness 100 mm.
Natural wood veneers are used in the production of doors and doorposts. This could result in slight colour differences between the various components.

PLEIADI SWINGING DOORS
PLEIADI swinging doors are the perfect match for PLEIADI sliding doors, and are the ideal solution for users preferring to furnish their home in a single attractive style. The main characteristic of PLEIADI swinging doors is their reversibility, enabling the opening direction to be chosen at the moment of installation. The hollow-core door is 44 cm thick, and is available in standard sizes as a single door, in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered. Three versions are available: flush panel, fully glazed or glazed in small panes. Doors are ready for the insertion of a sheet of glass with a thickness of 6 mm, which is not supplied, permitting maximum personalization by users. Doors are fitted with a lock, inset by 50 mm and with a distance of 90 mm between the centres of the handle hole and the keyhole. Tria model hinges. The mortised recess for the lock is cut at the centre of the door thickness, and the inset lock has a single latch bolt. The key lock the bolt in position but leaves the handle free, preventing damage by accidental forcing. The positions of the latch bolt, handle and key allow the lock to be inverted in the pre-mortised recess, and both the lock and the standard hinges are brass-finished. The uprights of the frame surround are rounded, with flat crosspieces at the top.

Technical characteristics of door panel

hollow-core panel with thickness 44 mm;
finishes available: Light Tanganyika, Walnut Tanganyika, Sanded Tanganyika, White Lacquer;
versions available: flush door, glazed door, glazed panelled door;
panel fitted with lock: inset 50 mm, distance between handle and key holes centre 90 mm. Lock model Tria;
the lock hole is cut centrally with respect to the transversal axis of symmetry of the door panel;
the lock is embedded with only one central latch. The key locks the latch, leaving the handle free, however, to prevent accidental forcing. The positions of the latch, handle socket and key allow the lock to be inverted in the pre-drilled hole;
hinges and lock in brass-plated steel. Hinges with chromed cover and chromed lock available by request only;
handles supplied only by request;
designed for fitting of 6 mm thickness glass;
glass is not supplied;
sealing strips are brown for all finishes, except for White Lacquer, for which the sealing strip is grey.
Natural wood veneers are used in the production of doors and doorposts. This could result in slight colour differences between the various components.

Characteristics of door post and architrave

vertical architrave sections are rounded and horizontal sections are flat.
All architrave sections must be cut to fit the clear opening size during installation;
the architrave has a 20 mm projection and permits a maximum telescopic movement of 15 mm;
in case of extra wall thicknesses (from a minimum of 140 mm to a maximum of 370 mm), wooden strips in each finish version can be supplied on request.

GEMINI
GEMINI sliding doors are made for use with the Scrigno Applauso frame. The hinged door panel folds over onto the other panel, like or book or like two hands clapping, enabling a sliding disappearing door of normal dimensions to be installed even when only limited space is available. The version with double doors can be used for openings up to 240 cm in width, with only minimum space occupied by the frames embedded in the wall. The door is composed of two hollow-core panels with a thickness of 40 mm, and is supplied with a bottom groove for the floor guide (only on external panel) and pre-mortised for the Kit Chiudiscrigno handle with lock (not included). The version with double doors is pre-mortised for the Kit Chiudiscrigno handle without lock. GEMINI sliding doors are available in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered. Brown sealing strips are supplied for all wood models, with grey seals for the white lacquer version. The hinges supplied as standard accessories are finished in polished brass or polished chrome according to the handle finishing. The uprights of the frame surround are rounded, with flat crosspieces at the top.

Technical characteristics of door panel

model made from two flush hollow-core panels with thickness 40 mm;
finishes available: light Tanganyika, Walnut Tanganyika, Sanded Tanganyika, White Lacquer;
lower groove for floor guide (on rear panel only);
single doors are always pre-drilled for “Kit Chiudiscrigno” handles with lock (not included).
The version with double doors is pre-mortised for the Kit Chiudiscrigno handle without lock.
hinges included as standard accessories are in polished brass or in chrome brass;
sealing strips are brown for all finishes, except for White Lacquer, for which the sealing strip is grey;

ANTARES
ANTARES doors are made for use with the Scrigno Armonico frame. The sliding door disappears only partially (half swinging and half sliding), allowing this frame to be installed where only limited space is available. The hinged panel of the door opens to 90°. The door is composed of two flush hollow-core panels with a thickness of 40 mm, and is supplied with a bottom groove for the floor guide (only on external panel) and pre-mortised for the Kit Chiudiscrigno handle with lock (not included). The version with double doors is pre-mortised for the Kit Chiudiscrigno handle without lock.
ANTARES sliding doors are available in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered.
Brown sealing strips are supplied for all wood models, with grey seals for the white lacquer version. The hinges supplied as standard accessories are finished in polished brass or polished chrome according to the handle finishing.
The uprights of the frame surround are rounded, with flat crosspieces at the top.

Technical characteristics of door panel

model made from two flush hollow-core panels with thickness 40 mm;
finishes available: Light Tanganyika, Walnut Tanganyika, Sanded Tanganyika, White Lacquer;
lower groove for floor guide (on rear panel only);
single doors are always pre-drilled for “Kit Chiudiscrigno” handles with lock (not included). On request, you could have pre-drilled doors for different handles or doors without pre-drilled holes;
hinges included as standard accessories are in polished brass
sealing strips are brown for all finishes, except for White Lacquer, for which the sealing strip is grey.

ALTAIR
ALTAIR sliding doors show their versatility in the number of different frame models on which they can be fitted: Scrigno Base, Scrigno Granluce, Scrigno Pratico and Scrigno Essential. Hollow-core panel with a thickness of 40 mm, supplied with a bottom groove for the floor guide and pre-mortised for the Kit Chiudiscrigno handle with lock (not included). PLEIADI sliding doors are available in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered. Available only in fully glazed version. Doors are ready for the insertion of a sheet of glass with a thickness of 6 mm, which is not supplied, permitting maximum personalization by users. Brown sealing strips are supplied for all wood models. The uprights of the frame surround are rounded, with flat crosspieces at the top.

Technical characteristics of sliding door panel

hollow-core panel with thickness 40 mm;
finishes available: Light Tanganyika, Walnut Tanganyika, Sanded Tanganyika;
White Lacquer;
versions available: glazed door;
lower groove for floor guide;
for double doors, door post sealing strips are included;
single doors are always pre-drilled for “Kit Chiudiscrigno” handles with lock (not included);
designed for fitting of 6 mm thickness glass;
glass is not supplied;
sealing strips are brown for all finishes;
The version with double doors is pre-mortised for the Kit Chiudiscrigno handle without lock.
Natural wood veneers are used in the production of doors and doorposts. This could result in slight colour differences between the various components.

LYRA
LYRA sliding doors are made for use with the Scrigno Orbitale frame, and are characterized by their distinctive curved shape. This is the ideal solution for modern needs for interior design in homes and other buildings where there is a growing need to personalize particular spaces. Hollow-core panel with a thickness of 40 mm, supplied with a bottom groove for the floor guide. LYRA sliding doors are available in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered, all pre-mortised for the Kit Chiudiscrigno handle without lock (not included), except for the semi-finished Tanganyika version, where this feature is available only on request. The doorposts are complete with dust brushes, sealing strips and a frame surround with rounded uprights and flat crosspieces at the top.

Technical characteristics of sliding door panel

doors are available in these versions: White Lacquer, Walnut Tanganyika and Sanded Tanganyika;
hollow-core door with thickness 40 mm;
lower groove for floor guide;
White Lacquer and Walnut Tanganyika finishes are supplied pre-drilled for “Kit Chiudiscrigno” handles without lock. If no pre-drilled holes for handles are required, this must be specified with orders.
door panels in Sanded Tanganyika are not pre-drilled for “Kit Chiudiscrigno” handles without lock. Pre-drilled holes can be supplied only if specified with orders.
ready-to-use door posts with dust brush, sealing strip and cover profiles;
the door post must be cut to size to fit the clear opening size during installation.
Natural wood veneers are used in the production of doors and doorposts. This could result in slight colour differences between the various components.

Category: Doors

Tags: door, Doors, Scrigno, sliding door, Sliding doors, Swinging door, Swinging doors

INFORMATION REQUEST

Fill out the form to request information from SCRIGNO S.P.A. Unipersonale

Enter the characters that you see in the image

Reason for request

I have read and accepted the Privacy Policy

SLIDING AND SWINGING DOORS

Simple and elegant solutions

Other Products by SCRIGNO

ESSENTIAL

FRAMES FOR SLIDING DOORS

FRAMES FOR SLIDING WINDOWS

GLASS DOORS

SLIDING AND SWINGING DOORS