Published on Giugno 25th, 2014 | by Raffaella Capritti
0Via Amerigo Vespucci, 10 - 461000 Mantova (MC) - ITALY
Phone +39.0376.343011 - Fax +39.0376.343020
WALL PLASTBAU 3
Made in ItalySelf-supporting insulated formwork elements
Features of the formwork wall Plastbau ® 3 materiales
It is an insulating disposable formwork destined to built vertical structures in concrete, consisting of two panels in high density foam polystyrene EPS150 (self-extinguishing), Class EUR E, connected together, at a variable distance, by a series of metal trellis.
The metal trellis are made up with vertical uprights Ø8, Ø10 in B450C, fitted every 20 cm on the two internal sides of the formwork and connected with beams Ø5 and by a series of diagonals Ø3, used to make the formwork stiffer during the M casting.
Features
The diagonals are opposed one to the other as to host, before casting, the inside horizontal bars forecast by the designer.
The space between two EPS plates is filled with concrete, thus building self-standing vertical walls compliant with standards.
It is thus possible to build civil and industrial works and multistorey buildings, in concrete, suitable insulated and finished.
The formwork internal and external plates consist of foam polystyrene styrenics (EPS), EPS 150 grey, improved lambda Λ D = 0.031 W/mK manufactured according to the standard EN 13163 and to the EC standard as forecast by the Italian regulations on insulating materials.
According to their final use, the grey plates are manufactured with a material whose mass volume accounts for p=27/30 kg/m3. EPS is compatible with concrete, cement, masonry, brickworks, mortar, plaster, bituminous waterproof membranes, etc. and therefore it can be used for different applications, paying simply attention, should it be opened to the outside, to protect it from UV rays.
Specific thermal capacity Cp=1450 J/(kg K)*
Water steam resistance factor μ = 60*.
Internal plates are always manufactured with the same thickness, 5 cm, 7,5 cm, 10 cm, while external plates, as specified on the table, can be 5, 7.5, 10, 15, 20 cm thick, as to provide for a better thermal insulation. Table values according to the regulation UNI EN ISO 10456
Construction details
The range of wall formwork Poliespanso Plastbau3 includes 55 sections, for a total of 11O tipi with a range for the raw brickwork varying from 22 to 45 cm.
The PIastbau3 wall exhibits a variable geometry as to comply with the structural designer requirements, with 5 formwork sections, from cm 12 to cm 30 and a vertical metal reinforcement Ø8 (kg/m2 3,95) or Ø10(kg/m2 6, 17) B450C at will, transversally connected to n. 25 Ø 5 per m2 (minimum n. 9 per m2 from DM 08) already available in the formwork panel.
The package reinforcement will be fitted within the building yarn with longitudinal horizontal bars, to be easily inserted within the specific spaces, every 20 cm, inside the formwork, a double metal mesh 20×20, transversally connected.
The thermal-technical designer profiting only from the raw formwork, can selected among 12 different thermal transmittance versions, from U 0.29 to U O, 11 W/ m2K.
Fill out the form to request information from POLIESPANSO S.R.L.
Other Products by POLIESPANSO
