Published on Gennaio 30th, 2014 | by Raffaella Capritti
0via Enrico Fermi, 51 - 24050 Grassobbio (BG)
Phone +39 035 3846011 - Fax +39 035 3846012
CHEMICAL ANCHORS
Made in ItalyFixing System
POLY EC
Bossong medium/light bi-component polyester styrenefree resin for use in different base materials as concrete, solid masonry and hollow bricks masonry.
Suitable for dry fastening. Suitable for use on hollow materials using the special plastic sleeve.
For applications in wet concrete or flooded hole and where very heavy load are required, our epoxy resin (BCR-EPOX and BCR-EPOXY21) or vinylester resin (BCR-VINIL and BCR V-PLUS) are recommended.
Thixotropic consistency.
The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material.
It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer.
It can also be used for repair and refilling.
SERVICE TEMPERATURE RANGE: Between – 40°C /+ 40°C with T°max long period of 30°C.
Download the technical datasheet
POLY SF
Bossong Medium/heavy-duty bi-component polyester styrene-free resin for use in different base materials as concrete, solid masonry and hollow bricks masonry.
According to data and features in the European Technical Approval (ETA) you have at your disposal one of the best chemical anchors in the European market with masonry approval ETAG 029 for fixing in solid and hollow masonry.
You can install it in wet masonry.
The product is homologated for being used with a wide range of threaded rods (from M8 to M12) and sleeves (GC 12×80 – GC 15×85 – GC 20×85).
Certified service temperatures are in the ranges -40°C/+40°C (T° max long period = 24°C) and -40°C/+50°C (T° max long period = 40°C).
ETA-15/0560 Option 7 from M8 to M16 for non-cracked concrete. The product is certified for fixing with variable anchorage depths. This means that the project engineer and the user have an high flexibility.
Maximum embedment depth up to 20 times nominal threaded rod diameter. Loads for installation in dry and wet concrete. Certified service temperatures are in the ranges: -40°C/+50°C (T° max long period = 40°C).
VOC according to the French Decree nr. 2011-321 and the Norm ISO 16000.
Due to the absence of styrene (no strong smell) the use is possible also in closed places.
Suitable for use on hollow materials using the special plastic sleeve.
Quick setting and curing times.
Thixotropic consistency.
The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material.
For applications in wet concrete or flooded hole and where very heavy load are required, our epoxy resin (BCR-EPOX and BCR-EPOXY21) or vinylester resin (BCR-VINIL and BCR V-PLUS) are recommended.
It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer.
It can also be used for repair and refilling.
Download the technical datasheet
VINIL
Bossong heavy-duty bi-component vinylester styrene-free resin for use in different base materials as concrete, solid masonry, hollow bricks masonry and wood.
Due to the absence of styrene (no strong smell) the use is possible also in closed places.
ETA-15/0708 Option 7 from M8 to M16 for non-cracked concrete. It is certified for fixing with variable anchorage depths.
This means that the project engineer has with this product a considerable flexibility in the design phase.
Rebar diameter from 8 mm to 16 mm.
Possibility of using the product in dry and wet concrete.
Certified service temperatures are in the ranges:
-40°C/+40°C (T° max long period = 24°C)
-40°C/+50°C (T° max long period = 40°C)
Download the technical datasheet
V-PLUS
Bossong heavy-duty bi-component vinylester styrenefree resin for use in different base materials as concrete, solid masonry, hollow bricks masonry and wood.
According to CE-ETA load data, it is one of the best vinylester resins in the European market with double approval. ETA-09/0140 Option 7 from M8 to M24 for non-cracked concrete and OPTION 1 FOR INSTALLATION IN CRACKED CONCRETE with rods from M10 to M20. It is certified for fixing with variable anchorage depths. This means that the project engineer has with this product a considerable flexibility in the design phase. Increase of maximum embedment depth up to 20 times nominal threaded rod diameter. INCREASE OF PROJECT TENSION LOADS for installation in dry and wet concrete. ETA-09/0246 Rebar (diameter from 8mm to 32mm) for post installed rebar connections in reinforced concrete. Reduction of minimum embedment depth for the realization of post installed rebar connections. Fire resistance evaluation report. Approved 825 ml Jumbo version, ideal for large jobs. Possibility of using the product in dry and wet concrete and flooded hole (the latter approved only for threaded rods). The product hardening reaction takes place even in presence of water.
Certified service temperatures are in the ranges:
-40°C/+40°C (T° max long period = 24°C)
-40°C/+80°C (T° max long period = 50°C)
-40°C/+120°C (T° max long period = 72°C).
Reduced curing time for base material temperatures from -10°C to +40°C.
VOC according to the French Decree nr. 2011-321 and the Norm ISO 16000.
Due to the absence of styrene (no strong smell) the use is possible also in closed places. This resin can be used also with wet concrete and flooded hole.
Thixotropic consistency.
The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material.
It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer.
It can also be used for repair and refilling.
Download the technical datasheet
V-PLUS WINTER
Bossong heavy-duty bi-component vinylester styrenefree resin for use in different base materials as concrete, solid masonry, hollow bricks masonry and wood.
Special formulation for application in winter season up to -20°C of ambient temperature.
Fast curing time for low temperature.
ETA-09/0140 Option 7 from M8 to M24 for non-cracked concrete and OPTION 1 FOR INSTALLATION IN CRACKED CONCRETE with rods from M10 to M20. It is certified for fixing with variable anchorage depths.
ETA-09/0246 Rebar (diameter from 8mm to 32mm) for post installed rebar connections in reinforced concrete. Reduction of minimum embedment depth for the realization of post installed rebar connections.
Due to the absence of styrene (no strong smell) the use is possible also in closed places.
Thixotropic consistency.
The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material.
It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer.
It can also be used for repair and refilling.
Certified service temperatures are in the ranges:
-40°C/+40°C (T° max long period = 24°C)
-40°C/+80°C (T° max long period = 50°C)
-40°C/+120°C (T° max long period = 72°C).
Download the technical datasheet
V-PLUS TROPICAL
Bossong heavy-duty bi-component vinylester styrenefree resin for use in different base materials as concrete, solid masonry, hollow bricks masonry and wood.
Special formulation for application in summer season up to +50°C of ambient temperature.
Suitable curing time for high temperature.
ETA-09/0140 Option 7 from M8 to M24 for non-cracked concrete and OPTION 1 FOR INSTALLATION IN CRACKED CONCRETE with rods from M10 to M20. It is certified for fixing with variable anchorage depths.
ETA-09/0246 Rebar (diameter from 8mm to 32mm) for post installed rebar connections in reinforced concrete. Reduction of minimum embedment depth for the realization of post installed rebar connections.
Due to the absence of styrene (no strong smell) the use is possible also in closed places.
Thixotropic consistency.
The resin, due to its strong adhesion value and the ease with which it penetrates holes and hollow areas, permits secure fixing without expansion and so without stresses in the base material.
It does not need premixing, the resin and hardener are only mixed during extrusion in the special mixer.
It can also be used for repair and refilling.
Certified service temperatures are in the ranges:
-40°C/+40°C (T° max long period = 24°C)
-40°C/+80°C (T° max long period = 50°C)
-40°C/+120°C (T° max long period = 72°C).
Download the technical datasheet
EPOXY 21
Bossong high-adhesion epoxy resin for heavy-duty fastenings for use in different base materials as concrete, solid masonry and wood. Double CE qualification also under seismic C2 activities.
According to data and features in the European Technical Approvals (ETA) you have at your disposal one of the best chemical anchors in the European market with double approval. The product is homologated for being used with a wide range of threaded rods (from M8 to M30) and rebar (diameter from 8mm to 32mm).
You can use it in wet concrete and flooded hole without doubling the curing time (reduction of the recommended loads of 20%).
Option 7 from M8 to M30 for non-cracked concrete and Option 1 for installation in cracked concrete with rods from M12 to M24. It is certified for fixing with variable anchorage depths.
This means that the project engineer has with this product a considerable flexibility in the design phase.
ETA for post installed rebar connections in accordance with Eurocode 2 and TR023 with maximum allowed depth of 2500 mm, certified installation with both drill and core-drill (dry/wet).
Download the technical datasheet
Fill out the form to request information from BOSSONG S.P.A.
Press by CHEMICAL ANCHORS
Bossong BCR V Plus: New homologation for seiemic anchors with rebars with improved adherence
The vinylester styrene-free chemical anchor BOSSONG BCR V PLUS has recently obtained seismic qualification for the creation of post-installed connections of rebars with improved adherence in concrete. The product was qualified in accordance with the French legislative ... Read More →