Published on Luglio 9th, 2014 | by Raffaella Capritti

0

STARKEM S.R.L.

via Donatori di Sangue, 32 - 31029 Vittorio Veneto (TV) - ITALY

Phone +39 0438 912693 - Fax +39 0438 912175

www.starkem.com/en/home.aspx

STARBLOCK AMIANTO

Made in Italy

Coatings asbestos reclamation

Preparation of surfaces
The surfaces must be prepared by removing any remaining dirt (dust, algae, moss, previous treatments not perfectly anchored, etc.).

Application product
The application can be made with roller, brush or spray; where required, make the second draft after complete drying of the first layer.

-Encapsulating coating TYPE A (to external view):

• STARBLOCK PRIMER as a hardener and promoter of adhesion; quantities to apply depend on the absorption of support (approximately 200-300 g/m2);
• STARBLOCK AMIANTO:

a) First coat with dry thickness not less than 190 ± 10 micron (equivalent to 420 g/m2);
b) Second coat of contrasting colour with dry thickness not less than 130 ± 10 micron (equivalent to 280 g/m2).
Total dry thickness shall not be less than 300 micron and the second layer of Starkem STARBLOCK shall not exceed the thickness of the first layer.

– Encapsulating coating TYPE B (to inside view):

1. STARBLOCK PRIMER as a hardener and promoter of adhesion; quantities to apply depend on the absorption of support (approximately 200-300 g/m2);
2. STARBLOCK AMIANTO:

a) First coat with dry thickness not less than 160 ± 10 micron (equivalent to 350 g/m2);
b) Second coat of contrasting colour with dry thickness not less than 110 ± 10 micron (equivalent to 250 g/m2).
Total dry thickness shall not be less than 250 micron and the second layer of STARBLOCK shall not exceed the thickness of the first layer.

-Encapsulating coating TYPE C (not in view, containment operations):

1. STARBLOCK PRIMER as a hardener and promoter of adhesion; quantities to apply depend on the absorption of support (approximately 200-300 g/m2);
2. STARBLOCK AMIANTO with dry thickness not less than 210 ± 10 micron (in two coats of similar thickness to total 500 g/m2).

Total dry thickness shall not be less than 200 micron.

-Coating TYPE D (temporary encapsulation for removal or disposal):

1. STARBLOCK PRIMER TIPO D to apply of colour appropriate to not less than 200 g/m2.

INFORMATION REQUEST

Fill out the form to request information from STARKEM S.R.L.

Profession Architect Engineer Surveyor Geologist Construction Worker Construction company Retailer Installation technician Student Other Private individual Not specified

Enter the characters that you see in the image

Reason for request

I have read and accepted the Privacy Policy

Other Products by STARKEM

FIREBLOCK

STARBLOCK AMIANTO