Published on Febbraio 12th, 2014 | by Raffaella Capritti

0

BRIANZA PLASTICA S.P.A.

Via Rivera, 50 - 20841 Carate Brianza (MB)

Phone + 39 0362 91601 - 800 554994 - Fax + 39 0362 990457

www.brianzaplastica.it/inglese/

ELYONDA

Made in Italy

Opaque corrugated/ribbed sheets

Elyonda (R146; R153; R177) are corrugated or ribbed opaque sheets made from polyester resin reinforced with fiberglass and aluminium. The Elyonda range is produced using an exclusive isophthalic anti-UV gel coat applied to the surface exposed to weather corrosion (resulting in a high degree of resistance to abrasion). Light, resistant and durable, the Elyonda sheets are designed to satisfy all roofings and ceilings, allowing for greater design freedom whether you are working with new structures or partial or total restructuring projects.

PLATES R146 – R153 – R177
Opacity: 100% opaque
Weight: std 3.200 kg/m², on request 3.800 kg/m²
Operating temperature: -60°C + 140°C
Reaction to fire: Class 1 (Approved by the Minister for Internal Affairs) M.D. 26/06/84 M.D. 03/09/01
Linear thermal expansion: 2-2.5 x 10-5 cm/cm°C
Water absorption: 0.2% after 48 hours of immersion
Colours: grey (light, smoke, charcoal), green, brick red (others on request)

MAIN ADVANTAGES OF ELYONDA SHEETS ARE:

• 100% opaque
• Class 1 fire resistance (Malian standard)
• Outside surface gel-coat protected
• High resistance to chemical agents
• Easily handling
• Low noise transmission when raining

elyonda lt

Opaque fiberglass sheet

Opaque fiberglass sheet with a special polyester film (type Melinex 301) that gives the sheet a surface armour ensuring high resistance to atmospheric abrasion and preventing the glass fibre from rising to the surface.

APPLICATIONS

• Pergolas, verandas
• Roofs
• Gardening
• Hobbies

THE MATERIAL WITH AN EXCELLENT QUALITY-PRICE RATIO.

Fibreglass is a thermosetting composite material made of polyester resin reinforced with glass fibres. The resin solidifies during the production process and the glass fibre reinforcement inside it has the purpuose of absorbing and evenly distributing the mechanical stresses outside the compound.
The excellent performances coupled with light weight are the result of a balanced relationship between the components of the polyester matrix and glass reinforcement.

A WORLD OF COLOURS FOR YOU

* These and other colours available on request.

Installation

The sheets are installed starting from the gutter to the ridge, overlapping one or two waves for at least 200 mm of the head (increasing to 250 mm for slopes below 10%). The hole for the screws should be made with a drill whose diameter is at least 2-3 mm larger than the screw in order to allow any thermal expansion. The sheets can be layed on steel/wood beams and block slab structures by employing the appropriate fixings. Make sure to use gaskets and washers large enough to cover the hole. The Elyonda LT sheets cannot be walked on.

INFORMATION REQUEST

Fill out the form to request information from BRIANZA PLASTICA S.P.A.

Profession Architect Engineer Surveyor Geologist Construction Worker Construction company Retailer Installation technician Student Other Private individual Not specified

Enter the characters that you see in the image

Reason for request

I have read and accepted the Privacy Policy

Other Products by BRIANZA PLASTICA

ELYONDA

ELYPLAN

ELYPLAST

ISOTEC

ISOTEC LINEA

ISOTEC LINEA WALLS APPLICATION

ISOTEC XL

Press by ELYONDA

Declared thermal conductivity λD of 0.023 W/mK for ISOTEC

ISOTEC, even greater performance This important result confirms the >quality of this insulation system, which next year will celebrate thirty years on the market. ISOTEC is now a point of reference for designers, a valuable ally in the ... Read More →